Gulf Crafts in Qatar is offering a wide range of career opportunities across HSE, maintenance, electrical engineering, scaffolding, project planning, drafting, technical sales, digital marketing, mechanical engineering, and MEP works. Gulf Crafts jobs in Qatar target technical, engineering, and commercial professionals for projects involving civil buildings, infrastructure, HV/MV electrical systems, Oil & Gas, water infrastructure, and industrial services.
Gulf Crafts Jobs in Qatar
1. Job: Safety Officer – Civil Building & Infrastructure at Gulf Crafts
The Safety Officer – Civil Building & Infrastructure monitors daily site activities and ensures compliance with HSE policies, procedures, and applicable safety standards.
Key Responsibilities and Requirements:
- Monitor daily site activities for compliance with HSE policies and procedures.
- Ensure applicable safety standards are followed.
- Conduct regular site safety inspections.
- Identify unsafe conditions and practices.
- Implement corrective and preventive actions.
- Minimize workplace and construction risks.
- Conduct risk assessments for construction activities.
- Conduct Job Safety Analysis (JSA/JHA).
- Have relevant knowledge of construction and infrastructure safety practices.
2. Job: Service Technician at Gulf Crafts
The Service Technician performs preventive and corrective maintenance on analyzers, sensors, RTUs, panels, and instrumentation systems while responding to KAHRAMAA breakdowns and technical issues.
Key Responsibilities and Requirements:
- Perform preventive and corrective maintenance of WQE equipment.
- Maintain RCA analyzers.
- Maintain sensors and related equipment.
- Work with RTUs and panels.
- Maintain instrumentation systems.
- Respond to KAHRAMAA breakdowns, abnormalities, and defects within 24 hours of notification.
- Diagnose technical faults.
- Assess the severity of faults and equipment problems.
- Perform appropriate troubleshooting.
- Carry out required corrective maintenance.
3. Job: Scaffolding Inspector at Gulf Crafts
The Scaffolding Inspector ensures scaffolding structures are safe and compliant before use and following modifications or adverse conditions.
Key Responsibilities and Requirements:
- Inspect scaffolding structures before use.
- Reinspect scaffolds after modifications or adverse conditions.
- Check scaffolding erection, alteration, and dismantling activities for compliance.
- Verify scaffolding components and platforms.
- Inspect access systems.
- Check guardrails and toe boards.
- Verify scaffold stability.
- Ensure scaffolds are properly tagged and identified.
4. Job: Scaffolding Supervisor at Gulf Crafts
The Scaffolding Supervisor supervises daily scaffolding erection, modification, and dismantling activities while ensuring compliance with approved drawings and safety requirements.
Key Responsibilities and Requirements:
- Supervise daily scaffolding erection activities.
- Oversee scaffold modifications and dismantling.
- Ensure scaffolding is erected according to approved drawings.
- Ensure compliance with approved procedures and safety standards.
- Inspect scaffolding before use.
- Check access systems, platforms, and components.
- Ensure proper scaffold tagging and identification.
- Supervise teams and promote safe scaffolding practices.
5. Job: Switchgear Technician at Gulf Crafts
The Switchgear Technician carries out maintenance and technical activities on 11 kV switchgear, including inspection, testing, troubleshooting, and compliance with high-voltage safety requirements.
Key Responsibilities and Requirements:
- Carry out maintenance and technical work on 11 kV switchgear.
- Follow instructions from the Safety Document Holder.
- Inspect switchgear equipment.
- Perform maintenance and testing.
- Troubleshoot technical faults.
- Follow applicable high-voltage electrical safety procedures.
- Comply with KAHRAMAA requirements.
6. Job: Web Designer / Digital Marketing Specialist at Gulf Crafts
The Web Designer / Digital Marketing Specialist designs, develops, updates, and maintains the company website while supporting the management of online content.
Key Responsibilities and Requirements:
- Design, develop, update, and maintain the company website.
- Create responsive and user-friendly web pages.
- Ensure effective functionality across desktop and mobile devices.
- Update website content.
- Maintain and update website images.
- Update products and services information.
- Publish and update job vacancies.
- Maintain company information on the website.
- Have relevant web design, content management, and digital marketing skills.
7. Job: Maintenance & Testing Engineer at Gulf Crafts
The Maintenance & Testing Engineer executes maintenance, testing, commissioning, and troubleshooting activities for 11 kV switchgear at project sites.
Key Responsibilities and Requirements:
- Execute 11 kV switchgear maintenance.
- Conduct testing and commissioning activities.
- Troubleshoot switchgear equipment.
- Coordinate with KAHRAMAA Engineers.
- Coordinate the issuance of required safety documents.
- Supervise technicians and other staff under responsibility.
- Control and monitor site activities.
- Ensure activities comply with KAHRAMAA safety procedures and requirements.
8. Job: Senior Planning Engineer at Gulf Crafts
The Senior Planning Engineer develops and maintains project baseline schedules using Primavera P6 and monitors project performance against approved schedules.
Key Responsibilities and Requirements:
- Develop and maintain project baseline schedules.
- Use Primavera P6 for project planning.
- Prepare Work Breakdown Structures (WBS).
- Develop detailed project schedules.
- Prepare resource-loaded programs.
- Monitor project progress against approved schedules.
- Identify and analyze schedule variances.
- Prepare weekly and monthly progress reports.
- Develop S-curves.
- Prepare manpower histograms.
- Monitor and report Key Performance Indicators (KPIs).
9. Job: CP01 – Electrical Draftsman at Gulf Crafts
The Electrical Draftsman prepares detailed electrical drawings for construction and project requirements.
Key Responsibilities and Requirements:
- Prepare detailed electrical construction drawings.
- Prepare Power drawings.
- Develop Lighting drawings.
- Prepare Containment drawings.
- Develop detailed Electrical Room layouts.
- Prepare required details and sections.
- Prepare and update Single Line Diagrams (SLDs).
- Have appropriate technical drafting skills for electrical projects.
10. Job: Pump Operator at Gulf Crafts
The Pump Operator operates concrete pump machinery safely and efficiently while supporting daily pumping activities according to project requirements.
Key Responsibilities and Requirements:
- Operate concrete pump machinery safely and efficiently.
- Handle daily pumping operations according to project requirements.
- Ensure proper setup of the concrete pump.
- Operate equipment correctly and efficiently.
- Perform basic maintenance on the concrete pump.
- Follow site safety procedures.
- Comply with company HSE requirements.
11. Job: HV Sales Engineer at Gulf Crafts
The HV Sales Engineer develops new business opportunities and promotes HV/MV electrical equipment, products, and solutions in Qatar and the wider GCC market.
Key Responsibilities and Requirements:
- Develop new business opportunities.
- Achieve assigned sales targets.
- Promote and sell HV/MV electrical equipment and solutions.
- Identify potential customers and project opportunities in Qatar and the GCC market.
- Build relationships with contractors.
- Develop relationships with consultants and utilities.
- Engage with EPC companies.
- Build and maintain relationships with industrial clients.
- Demonstrate technical sales, negotiation, and business development skills.
12. Job: Mechanical Draftsman – MEP at Gulf Crafts
The Mechanical Draftsman – MEP prepares detailed shop drawings for mechanical and building services systems.
Key Responsibilities and Requirements:
- Prepare detailed shop drawings.
- Prepare drawings for HVAC systems.
- Develop plumbing system drawings.
- Prepare drainage system drawings.
- Develop drawings for firefighting systems.
- Prepare irrigation system drawings.
- Coordinate mechanical drawings according to MEP project requirements.
13. Job: Senior Sales Engineer – Oil & Gas at Gulf Crafts
The Senior Sales Engineer – Oil & Gas identifies new business opportunities and develops relationships with Oil & Gas operators, EPC contractors, consultants, and other key customers.
Key Responsibilities and Requirements:
- Identify and develop new business opportunities in the Oil & Gas sector.
- Engage with Oil & Gas operators.
- Develop relationships with EPC contractors.
- Work with electrical contractors and consultants.
- Engage with system integrators.
- Maintain strong relationships with customers and key decision-makers.
- Review customer RFQs.
- Review ITTs.
- Analyze technical specifications.
- Review SLDs and load schedules.
- Review BOQs.
- Review datasheets and project requirements.
14. Job: DP01 – Mechanical Design Engineer – Low Voltage Switchgear at Gulf Crafts
The Mechanical Design Engineer – Low Voltage Switchgear prepares mechanical designs for IEC-range LV power distribution systems.
Key Responsibilities and Requirements:
- Prepare mechanical designs for LV power distribution systems.
- Work with IEC-range equipment and requirements.
- Design Main Distribution Boards (MDBs).
- Design Sub Main Distribution Boards (SMDBs).
- Work with Motor Control Centers (MCCs).
- Design ATS Panels.
- Prepare designs for FDBs.
- Design Control Panels.
- Work on Package Substations.
- Have relevant technical knowledge of LV switchgear and power distribution systems.
15. Job: DP02 – Sales Engineer – Electrical Meters at Gulf Crafts
The Sales Engineer – Electrical Meters develops customer relationships and generates sales opportunities for electrical meters and metering solutions.
Key Responsibilities and Requirements:
- Develop and maintain relationships with clients.
- Build relationships with contractors and consultants.
- Engage with utilities, MEP companies, and developers.
- Develop relationships with industrial customers.
- Identify new business opportunities.
- Generate sales leads for electrical meters and metering solutions.
- Promote and sell electrical meters.
- Promote smart meters.
- Sell energy meters.
- Promote related metering products and solutions.
16. Job: CP01 – Mechanical Draftsman at Gulf Crafts
The Mechanical Draftsman prepares detailed mechanical MEP drawings for building and construction projects.
Key Responsibilities and Requirements:
- Prepare detailed mechanical MEP drawings.
- Support building and construction projects.
- Prepare CHW (Chilled Water) piping layouts.
- Develop related mechanical drawings.
- Prepare HVAC ducting layouts.
- Coordinate duct routing with other systems.
- Prepare detailed Plant Room layouts and drawings.
- Coordinate technical drawings according to project requirements.
17. Job: DP02 – HV Sales Engineer – Electrical at Gulf Crafts
The HV Sales Engineer – Electrical develops customer relationships and generates sales opportunities for HV/MV electrical equipment and solutions.
Key Responsibilities and Requirements:
- Develop and maintain relationships with contractors.
- Build relationships with consultants and clients.
- Engage with utilities and industrial customers.
- Identify new business opportunities.
- Generate sales leads for HV/MV electrical products and solutions.
- Promote and sell HV/MV electrical equipment.
- Promote related electrical products.
- Demonstrate appropriate technical sales and customer relationship skills.
18. Job: DP02 – Sales Engineer – DI Pipes at Gulf Crafts
The Sales Engineer – DI Pipes develops business opportunities and promotes Ductile Iron pipes and related water infrastructure products and solutions.
Key Responsibilities and Requirements:
- Develop and maintain relationships with clients.
- Build relationships with contractors and consultants.
- Coordinate with suppliers and developers.
- Develop relationships with relevant industry stakeholders.
- Identify new business opportunities.
- Generate sales leads for DI pipes.
- Promote and sell pipes and fittings.
- Promote valves and related products.
- Sell Ductile Iron pipe products.
- Promote water infrastructure solutions.
Benefits of Working at Gulf Crafts in Qatar
- Diverse career opportunities across engineering, electrical, mechanical, HSE, maintenance, planning, technical sales, and drafting.
- Exposure to specialized technologies and systems including HV/MV, 11 kV Switchgear, MEP, HVAC, electrical metering, and water infrastructure.
- Opportunities to work with KAHRAMAA requirements and procedures in maintenance, testing, and technical service roles.
- Career opportunities across infrastructure, civil buildings, Oil & Gas, electrical systems, and water-related projects.
- Roles combining technical and commercial expertise across EPC, engineering sales, planning, design, maintenance, and HSE.
If you do not find the right job, you can check out the available jobs in Qatar today.
📋 How to Apply for Gulf Craft Trading & Services Jobs in Qatar
Explore career opportunities at Gulf Craft Trading & Services WLL in Qatar and find current vacancies suited to your qualifications and professional experience. Review the job details and requirements, then proceed with your application through the recruitment page below.
🔗 View Gulf Craft Vacancies & Apply
💡 Strengthen your application by updating your CV with the skills, qualifications, and work experience most relevant to your preferred role.
Frequently Asked Questions About Gulf Crafts Jobs in Qatar
What jobs are available at Gulf Crafts in Qatar?
Gulf Crafts is offering 18 positions, including Safety Officer, Service Technician, Scaffolding Inspector, Scaffolding Supervisor, Switchgear Technician, Web Designer / Digital Marketing Specialist, Maintenance & Testing Engineer, Senior Planning Engineer, Electrical and Mechanical Draftsmen, Pump Operator, and several engineering sales and design positions.
What technical fields are covered by Gulf Crafts jobs?
The vacancies cover HSE, scaffolding, 11 kV Switchgear, Primavera P6, HV/MV, MEP, HVAC, LV systems, Oil & Gas, electrical metering, DI pipes, and water infrastructure solutions.
Are salaries provided for Gulf Crafts jobs in Qatar?
No salary information was included in the provided vacancy details. Candidates should confirm the salary, benefits, required qualifications and experience, working hours, project location, and other employment conditions during the recruitment process.
Tips Before Applying for Gulf Crafts Jobs in Qatar
- Tailor your CV to the target role: Highlight experience directly related to HSE, scaffolding, 11 kV Switchgear, MEP, HVAC, Primavera P6, HV/MV, Oil & Gas, or water infrastructure, depending on the position.
- Highlight relevant technical expertise: Electrical and maintenance candidates should emphasize experience with KAHRAMAA and high-voltage safety procedures, while planning engineers should highlight Primavera P6, WBS, S-curves, resource-loaded schedules, and KPIs.
- Show relevant projects and measurable achievements: Sales engineers should highlight experience with EPC contractors, consultants, utilities, and industrial clients, while engineers, technicians, and draftsmen should include relevant projects, systems, equipment, and drawings they have worked on.
